How To Connect Dell Laptop To Wifi Windows 10

A Wi-Fi adapter eases the procedure of connecting your Windows 10 laptop or desktop to the network and internet without dealing with cables. Nonetheless, it's but user-friendly if you know where to find the settings.
Whether setting up a device for the first fourth dimension, connecting in a new place, or looking for an efficient method to connect multiple computers to the same network, Windows 10 offers multiple ways to connect to the internet using a Wi-Fi connection apace.
In this Windows ten guide, we volition walk you through the steps to connect to a Wi-Fi network using the network flyout in Taskbar, Settings, Control Panel, and command lines with Command Prompt.
How to connect to Wi-Fi network using Taskbar
To connect to a Wi-Fi network through the taskbar on Windows 10, use these steps:
- Click the Network icon in the bottom-right corner of the taskbar.
- Quick notation: Alternatively, you can open up Activity Center (Windows key + A), and then click the Network button in the "Quick actions" section to access the network flyout. If you don't run into the push, click the upwards arrow push on the left.
- Select the wireless network to connect.
- (Optional) Check the Connect automatically selection.
- Click the Connect button.
- Quick tip: If you lot do not see whatsoever wireless access bespeak in the list, click the Wi-Fi button to plow on the adapter.
- Confirm the network security primal (password).
- Click the Next button.
- Confirm whether the device should be discoverable in the network by other PCs.
Once you complete the steps, the laptop will connect to the network using the Wi-Fi connectedness.
Reconnect automatically
In addition, Windows 10 as well offers an pick to reconnect the device automatically afterward disconnecting the adapter manually.
To set up the Wi-Fi adapter to reconnect automatically, utilise these steps:
- Click the network icon in the organization tray.
- Click the Wi-Fi button to turn off wireless connectivity.
- Use the drop-down menu and select when to re-connect automatically:
- Manually.
- In one hour.
- In four hours.
- In i day.
Afterwards you complete the steps, Windows 10 won't try to connect to a wireless connection until the time you selected. When using this functionality, the device will only connect automatically to previously known networks.
How to connect to Wi-Fi network using Settings
Using "Network & Security" settings, you can also add together wireless connections manually, so when the network is in range, the laptop will connect automatically.
To prevision a Wi-Fi connection on Windows 10, use these steps:
- Open Settings.
- Click on Network & Security.
- Click on Wi-Fi.
- Click the Manage known networks choice.
- Click the Add a new network button.
- Confirm the name of the network.
- Use the drop-down menu to select the Security type — for example, WPA2-Personal AES.
- Confirm the network security key (password).
- Check the Connect automatically option.
- Check the Connect even if this network is not broadcasting option (if required).
- Click the Save button.
In one case you complete the steps, the device will connect automatically when the wireless network is in range.
How to connect to Wi-Fi network using Command Panel
To connect to a Wi-Fi network with Control Console, use these steps:
- Open Control Console.
- Click on Network and Internet.
- Click on Network and Sharing Center.
- Under the "Change your networking settings" section, click the Set up a new connection or network option.
- Select the Manually connect to a wireless network option.
- Click the Next button.
- Confirm the network name.
- Use the driblet-down carte du jour to select the Security type — for example, WPA2-Personal.
- Ostend the network security primal (password).
- Check the Kickoff this connection automatically option.
- (Optional) Check the Connect fifty-fifty if the network is non dissemination option.
- Click the Next button.
- Click the Close button.
Once y'all complete the steps, the computer volition automatically connect to the Wi-Fi network.
How to connect to Wi-Fi network using Command Prompt
How to connect to Wi-Fi network using Command Prompt
Alternatively, yous can besides utilize the netsh command-line tool in Command Prompt to connect to a Wi-Fi network.
To connect to a Wi-Fi admission betoken with commands, utilise these steps:
- Open up Start.
- Search for Command Prompt, right-click the top result, and select the Run as administrator option.
- Type the post-obit command to view the available network profiles and press Enter: netsh wlan testify contour
- Confirm the Wi-Fi network profile with your preferred settings.
- Blazon the post-obit command to connect to the wireless network on Windows 10 and press Enter: netsh wlan connect ssid=YOUR-WIFI-SSID proper name=Profile-NAME
In the control, remember to specify the name (SSID) of the network and profile name with your network settings. For example, this command connects to the "tsunami" network using the "tsunami" profile: netsh wlan connect ssid=tsunami name=tsunami.
- Quick tip: On devices with more than than ane wireless adapter, y'all must as well specify which adapter you want to use in the command. For instance: netsh wlan connect ssid=YOUR-WIFI-SSID name=Profile-Name interface=Wi-Fi.
After y'all consummate the steps, the device will connect to the wireless network.
New network connection
The netsh tool as well lets you manage Wi-Fi adapters and networks. The only caveat is that yous tin merely manage previously known networks since you cannot create new network profiles with this tool.
When you need to use Control Prompt to connect one or multiple computers to the same wireless network, you can export the network profile created automatically during the first connexion. Then you can import information technology using the netsh tool to connect using the command-line tool.
Consign Wi-Fi profile
To export a Wi-Fi profile with commands, use these steps:
- Open Start.
- Search for Command Prompt, right-click the tiptop result, and select the Run every bit administrator option.
- Type the post-obit command to view the available network profiles and press Enter: netsh wlan show profile
- Type the following command to export a profile and press Enter: netsh wlan export contour Profile-NAME key=clear binder=PATH\TO\Consign\FOLDER
For example, this command exports the seismic sea wave profile to the "Documents" folder: netsh wlan export profile tsunami key=clear folder=C:\Users\m\Documents.
One time you lot consummate the steps, you can import the same XML file to connect other devices to the same network.
Import Wi-Fi contour
To import a Wi-Fi profile on Windows 10, employ these steps:
- Open Start.
- Search for Command Prompt, right-click the tiptop upshot, and select the Run equally ambassador option.
- Blazon the following control to determine the proper name of the network adapter and press Enter: netsh wlan show interfaces
- Ostend the proper name of the adapter that will connect to the network.
- Type the following command to import the network profile and press Enter: netsh wlan add contour filename="PATH\TO\Profile.XML" Interface="YOUR-WIFI-ADAPTER-NAME" user=current
In the command, brand sure to specify the location of the XML file and network interface proper noun. For example, this command imports the xml contour located in the "Documents" folder to the Wi-Fi adapter: netsh wlan add together profile filename="C:\Users\m\Documents\wi-fi-tsunami.xml" Interface="WI-FI" user=current.
- Type the following command to connect to the wireless network and press Enter: netsh wlan connect ssid=YOUR-WIFI-SSID proper name=PROFILE-Proper noun
In the command, specify the SSID and profile proper name that corresponds to your network. For example, this command connects to an admission indicate using the "tsunami" SSID and "tsunami" profile name: netsh wlan connect ssid=tsunami proper noun=tsunami.
- Quick tip: If y'all have multiple wireless interfaces, you must too specify in the command which adapter you want to use. For example, netsh wlan connect ssid=YOUR-WIFI-SSID proper noun=PROFILE-Proper name interface=Wi-Fi.
After you consummate the steps, the computer should connect to the wireless network automatically.
More Windows resources
For more helpful manufactures, coverage, and answers to common questions about Windows x and Windows 11, visit the following resource:
- Windows 10 on Windows Central — All you need to know
- Windows 11 on Windows Primal — All you demand to know
Mauro Huculak is technical writer for WindowsCentral.com. His primary focus is to write comprehensive how-tos to help users get the nearly out of Windows 10 and its many related technologies. He has an Information technology background with professional certifications from Microsoft, Cisco, and CompTIA, and he's a recognized member of the Microsoft MVP community.
Source: https://www.windowscentral.com/how-connect-wi-fi-network-windows-10
Posted by: ballardcousise81.blogspot.com
0 Response to "How To Connect Dell Laptop To Wifi Windows 10"
Post a Comment